Stuctra Bond SMP60     

SMP60 Sabre Bond

Sabre Bond SMP60 is a high-stress structural bonding, neutral adhesive / sealant. Flexible class A (+/-50%) joint movement. Ideal for installation of signage when mechanical fasteners can’t be used. Widely used in the transport, utilities industry and building construction.

Ultobond 1


Ultobond4 is a world-leading very high bond industrial acrylic tape with a pressure-sensitive backer. Ultobond4 is a good industry standard VHB, available from super thin through to 1mm thickness.

Butyl z 2


Butyl-Z is a specialist non-hydroscopic, tar-like, self-adhesive that performs well in complex outdoor environment settings. Used for permanent labeling including manhole covers on our country’s main roads and rain network, Butyl-Z is a proven choice.



Nat-gum is a high-end, self-adhesive bonding tool for specialist individual applications. When other alternatives don’t work, Nat-gum is generally the answer. This tape has been developed alongside many of our permanent fixing applications, and is available in a wide range of sizes and thicknesses. Nat-gum has an internal carrier which ensures the adhesion doesn’t shift from the fixing point. 





Quiklok is our premium marine grade stainless steel, tool-less zip tie. The stainless steel strap simply feeds around the pre-drilled holes of the sign or label, and back through its own built-in tightening and locking device. Once tied, the Quiklok is locked permanently. Quiklok comes in a wide range of lengths and two main strength ratings – 40kg and 80kg.

Soflok 1a     


Softlok is a specialist stainless steel bolt with a moulded rubber grommet that fits below the bolt head to reduce the risk of over-tightening or damage to the sign over its long life. Softlok is a premium, reliable bolt range that comes in a wide range of shaft lengths and gauges.

 1 im    


Our unique Flange-Lok fastener comes in a very high grade stainless steel and is designed to permanently fix labels or signs to steel plates or flanges. Most useful in water treatment and extreme marine environments, the Flange-Lok needs pre-drilled holes and, once used, is virtually impossible to remove. When inserted, a light hammer tap on the fastener’s malleable head seals the hole and locks the fastener onto the surface. A wide range of shaft lengths and gauges are available.

Enquire Now